Anto-I For Electric Vehicle Fire
This robot consists of robot platform, water mist system, water mist fork and remote control. The mini size of the robot makes it quicker to deploy, easier to access to a limited space of a fire scene and handier to keep the robot in a fire truck cabinet after use. This robot is mainly used in fire fighting against various types of electric vehicles such as electric cars, electric SUVs, electric pickup trucks, electric trunk cargo, electric buses, and other fire scenes. It is of great significance to improve rescue safety and reduce casualties.
Product details
COOLING AND FIRE FIGHTING
The built-in water mist system of the Anto-I fire robot generates an inverted umbrella shaped water mist, with adjustable angles and a coverage area of up to 3 square meters. It can cover the ignition source of the battery pack at the bottom of the electric vehicle.
The human fire-fighters can operate the robot at 200 meters distance away from the explosive and extremely hazardous fire scene while get the job done.
GO UNDER THE BUTTOM OF EV ON FIRE
The ignition point of an electric vehicle is located in the battery pack at the bottom of the electric vehicle. The Anto-I fire robot can directly go under the bottom of the vehicle to cool down and extinguish the fire source, or the Water Mist Fork installed onto the robot can be extended into under the bottom of the vehicle to cool and extinguish the fire source.
EASY TO TRANSPORT
The mini size of robot allows it to be easily fit into a fire truck cabinet, making it easier to transport and making it possible that human fire fighters, fire trucks and robots reach to the fire scene at the same time.
FASTER TO DEPLOY AND RETRIEVE
The light weight robot (40Kg) allows 2 human fire fighters to carry to fire scenes such as higher floors of buildings, tanker truck fire on highways, forests, and etc, making it faster to deploy to a fire site and faster to retrieve later from the scene.
Technical specification
Anto-I / Portable EV Fire Robot | |||
BASIC DATA | |||
Dimension | L770xW480xH180mm | ||
Weight | 40kg | ||
Crawler | All-terrain flame-resistant rubber crawler | ||
Power | Lithium Battery, 24V 34AH | ||
Work Temperature | -20∽+80℃ (Standard) -40∽+80℃ (Optional) | ||
Motor | 2.3KW x 2 Electric Driven Servo Motor | ||
Travelling Speed | 1.0m/s | ||
Crossing Height | 80mm(without slope),100mm(with slope) | ||
Climbing Angle | ≥30° (Slope / Stairs) | ||
Traction Force | ≥500N | ||
Turning Radius | Turning in place | ||
Control Mode | Remote Control | ||
Continuous Travel Duration | 2 Hours | ||
Continuous Work Duration | 16 Hours (without load) | ||
Control Distance | ≥200m | ||
Protection Grade | IP65, water-proof | ||
BUILT-IN WATER MIST SYSTEM & DETACHABLE WATER MIST FORK | |||
Extinguisher Types | Water | ||
Work Pressure | 0.8 Mpa (8kg/c㎡) | ||
Spray Mode | Water mist | ||
Coverage Area | Built-in Water Mist System: 3㎡ Detachable Water Mist Fork: 5㎡ |
||
Hose Connector & Size | DN55 x 1, with 1.5 inch or 2.5 inch hose couplings | ||
CONFIGURATION | |||
Built-in Water Mist System | Standard | Various Standard of Couplings | Optional |
Detachable Water Mist Fork | Optional | Rotator for Coupling | Optional |
Roller Skid | Optional | Wheeled Stretcher | Optional |
Hose Carrier | Optional | Low Temperature Battery | Optional |